Instructions for Mounting a Wall Water Element

Wall features can complement any area. The relaxing sound of the waterfall will de-stress and comfort. wwlhs_bl_2__24648.jpg While any space will benefit from a wall fountain, they are most often placed in entryways. Even though each model might have slight differences on how to install it, the standard instructions are the same for all. There are usually several pieces that need to be assembled. Once you attach the base and the top you will then need to connect the pump and the tubing. It is advisable to carefully check out the instructions before you begin the assembly process. In general, it is simple and straightforward. Note, however, that the guidelines for your particular model can vary slightly. Do not hesitate to get someone to assist you to keep the wall fountain in the right place while you make a tiny mark on the wall. A level is the ideal to ensure it is mounted straight. Mark the position where you want the very top of the wall fountain as well as the bottom. There is more than one technique to hang a wall fountain. You will see slots on the back side of the wall fountain which can be mounted directly onto the screws. A second option is go with brackets mounted on the wall. This alternative tends to be suggested for large wall fountains. Mark the spot on the wall where the brackets need to be mounted. To insert the drywall anchors, first put pilot holes into the wall. Carefully tap on the anchors with a hammer to embed them into the wall.

The brackets can then be mounted on the wall with a screwdriver or cordless drill. It is finally time to put your wall fountain onto the mounting brackets. Check to see that it is in the correct position and safely on the brackets. Add water once the wall fountain is up. The pump should be totally immersed under water. It is now time to plug it in and watch the water flow. Carefully pour in just enough water to reach one inch below the top edge of the basin. Never fill the basin all the way to the top or it will overflow when the pump is not on. When the water is not being pumped, it all settles at the bottom which causes the water level to rise. The water will overflow and cause damage if your wall fountain is overly full.

The Early Society: Garden Fountains

Archaeological digs in Minoan Crete in Greece have exposed several types of channels. These were used to provide urban centers with water as well as to lessen flooding and get rid of waste material. Many were prepared from clay or even stone.

Whenever terracotta was made use of, it was frequently for canals as well as water pipes which came in rectangle-shaped or round patterns. Among these were terracotta piping that were U-shaped or a shortened, cone-like shape which have only appeared in Minoan society. The water provision at Knossos Palace was maintained with a strategy of terracotta piping which was placed underneath the floor, at depths varying from a few centimeters to many meters. The clay conduits were also utilized for collecting and storing water. Thus, these conduits had to be effective to: Subterranean Water Transportation: It is not quite understood why the Minoans wanted to transport water without it being enjoyed. Quality Water Transportation: Many scholars believe that these pipelines were utilized to generate a different distribution process for the residence.

Backyard Elegance: Outdoor Garden Fountains

Having a pond near your outdoor water fountain is no longer required because they can now be placed on a wall close by. Moreover, it is no longer necessary to dig, deal with a difficult installation process or clean the pond. Plumbing is no longer a necessity since this feature in now self-sufficient. Do not forget, however, to add water at regular intervals. Your pond should always contain fresh water, so be sure to empty the basin whenever it gets dirty.

Any number of materials can be used to make garden wall fountains, but stone and metal are the most frequently used. You need to know the style you are shooting for in order to decide on the best material. It is important to purchase hand-crafted, light garden wall features which are also easy to hang. Buying a fountain which needs minimal maintenance is important as well. Even though installing certain fountains can be difficult, the majority take little effort because the only parts which need special care are the re-circulating pump and the hardware to hang them. It is very simple to spruce up your garden with these kinds of fountains.

Fountains for Compact Spaces

The reflective properties of water means it can make smaller spaces look larger than they are.

Augmenting the reflective aspects of a fountain or water feature are possible by using dark materials. When the sun goes down, you can use submersed lights in different colors and shapes to light up your new feature. Eco-lights fueled by sunlight can be used during the day whereas you can use lights to enhance your garden at night. Natural therapies use them because they emanate a soothing effect which helps to relieve stress as well as anxiety.

The greenery in your garden is the perfect place to situate your water feature. People will be centered on the pond, artificial river or fountain in your garden. Water features make great additions to both large gardens or little patios. The best way to improve the ambience, position it in a good place and use the right accompaniments.

A Glimpse into the Beginnings of Wall Fountains

During his rule (1397-1455) of the Roman Catholic Church, the intellectual Pope Nicholas V directed scores of translations of ancient Greek classics into Latin. Continuing in his quest to make the city deserving of being called the seat of the Christian world, he decided to enhance the beauty of the city as well. Starting in 1453, the ruined Aqua Vergine, an ancient Roman aqueduct which had brought clean drinking water into the city from many miles away, underwent repair at the bidding of the Pope. The mostra, a monumental commemorative fountain constructed by ancient Romans to mark the point of arrival of an aqueduct, was a custom also restored by Nicholas V. The fascinating origins of the Trevi Fountain go back to an older fountain he had commissioned to the architect Leon Battista Alberti. The aqueduct he had reconditioned included modifications and extensions which eventually enabled it to supply the necessary water to the Trevi Fountain as well as the famed baroque fountains in the Piazza del Popolo and the Piazza Navona.


Modern Garden Decoration: Fountains and their Beginnings
Modern-day fountains function mostly as decoration for open spaces, to honor individuals or events, and enhance entertainment and recreational activities. read more
Your Large Garden Fountains: Maintenance & Routine Service
It is essential to replenish the water consistently so that it remains clean. Debris such as twigs, leaves or dirt should be cleaned up quickly. Extremely cold temperatures can affect your outdoor wall fountain so be sure to protect it during winer. If... read more
Wall Fountains A Definition
Living areas such as big yards, yoga studios, comfortable verandas, apartment balconies, or office settings are great places to add a water feature such as a garden wall fountain. The comforting sounds of flowing water from a fountain please the senses of sight and... read more