Simple Tips to Mount a Wall Water Feature

wwlhcj_bl_1__78325.jpg Enhance nearly any room with the addition of a wall fountain. The effects of the water sounds include bringing peace and calm to the room. People tend to hang wall fountains in any space where folks hang out, but most commonly in entryways. Even though each model might have slight differences on how to install it, the basic directions are the same for all. Be sure that all the different pieces are used in assembling it. Once you attach the base and the top you will then need to attach the pump and the tubing. Be sure to review the directions before starting to ensure it is done properly. The set-up process is quite simple to grasp. Keep in mind, though, that each design might require a slight adjustment. Another person can be helpful to hold the wall fountain in the appropriate position so that you can mark the wall. A level is the best tool to ensure it is mounted straight. Both the top and the bottom should be marked. Wall fountains can be installed in more than just one way.

There are slots on the back which can be mounted onto the screws you place on the wall. A second option is go with brackets mounted on the wall. The second option is best, particularly for bigger wall fountains. Decide where the brackets need to be located and mark the wall accordingly. To place the drywall anchors, first put pilot holes into the wall. Insert the anchors by carefully hammering them into the wall. Hold the brackets in position on the wall and use a wireless drill or screwdriver to mount them. Hang your wall fountain by fastening it onto the brackets. Check to see that it is in the proper position and safely on the brackets. If the positioning is correct, it’s time to add water. Make certain there is sufficient water to cover the pump. Plug the pump into the wall and see the water begin to flow. The water should fill the basin to within one inch of the very top. Be attentive not to fill it completely to the top or it will overflow when you switch off the pump. When the pump is turned off the water all settles at the bottom of the bowl, causing the water level to rise. Whenever the fountain is overly full, water can spill out and cause damage to the immediate area.

The Many Styles of Wall Water Fountains

Putting a wall fountain in your yard or patio is ideal when you want to relax. Moreover, it can be made to fit into any wall space since it does not take up much room.

A spout, a water basin, internal piping, and a pump are essential for freestanding as well as mounted varieties. Traditional, modern, classic, and Asian are just a few of the styles from which you can choose.

Usually quite big, freestanding wall fountains, also referred to as floor fountains, have their basins on the ground.

It is possible to integrate a wall-mounted water feature onto an already existent wall or built into a new wall. Integrating this type of water feature into your landscape adds a cohesiveness to the look you want to attain rather than making it seem as if the fountain was merely added later.

Factors to Think About When Determining Where to Put Your Fountain

Before selecting a water fountain, carefully consider precisely where you want to put it. Any high-traffic areas such as driveways, entryways, or roundabouts are ideal spots to install one.

It is also possible to acquire a fountain made specifically to be mounted against a wall. Normally, they have something on the back of them like a hook or a bar with which you can use to secure them to a wall, post, or some other secure spot. There are many natural threats such as wind or animals which can knock over your fountain if you do not securely affix it to the wall, so do not neglect to do this as soon as possible.

In public places like parks where visitors tend to sit and relax for a few minutes, you will notice one other option – the garden sculpture style.

Landscape Elegance: Outdoor Fountains

It is also possible to locate your exterior water fountain near a wall since they do not need to be connected to a nearby pond. Excavating, installing and cleaning a nearby pond are no longer needed. Since this feature is self-contained, no plumbing is needed. All the same, water needs to be added regularly. Empty the water from the basin and place clear water in its place when you see that the spot is grimy.

Any number of materials can be utilized to make garden wall features, but stone and metal are the most practical. You must know the style you are shooting for in order to select the best material. Garden wall fountains come in many shapes and sizes, therefore ensure that the design you decide to purchase is hand-crafted, easy to hang and lightweight. Be sure that your water feature is manageable as far as upkeep is concerned. The re-circulating pump and hanging hardware are usually the only parts which need additional care in most installations, although there may be some cases in which the installation is a bit more complex. Little exertion is needed to enliven your garden with these types of fountains.

The Countless Construction Materials of Outdoor Fountains

Garden fountains these days are mostly made from metal, although you can find them in other materials too. Metallic versions offer clean lines and unique sculptural accents and can accommodate nearly any decorative style and budget. The interior design of your residence should set the look and feel of your yard and garden as well.

A popular choice today is copper, and it is used in the designing of many sculptural garden fountains.

Copper is common for both inside and outside use and is frequently found in tabletop and cascade fountains, among others. Another benefit of copper fountains is they are versatile and come in a wide variety of styles.

Brass water fountains are also common, although they tend to have a more traditional look than copper ones. Even though they are a bit old-fashioned, brass fountains are quite popular because they often include interesting artwork.

The most stylish metal right now is perhaps stainless steel. Adding a modern-looking steel design will immediately add value to your garden and elevate the overall ambiance. Like all water fountains, you can buy them in just about any size you prefer.

For people who want the visual appeal of a metal fountain but desire a lighter weight and more affordable option, fiberglass is the answer. The maintenance of fiberglass water fountains is quite simple, so they have many advantages that people appreciate.


Outdoor Fountains And Their Use In Ancient Minoa
Archaeological excavations in Minoan Crete in Greece have discovered several types of channels. They were used for water supply as well as removal of storm... read more
From Where Did Landscape Fountains Originate from?
Contemporary fountains are used to embellish community spaces, honor individuals or events, and enrich recreational and entertainment events. read more
Where did Large Outdoor Fountains Come From?
These days, fountains adorn public spaces and are used to pay tribute to individuals or events and fill recreational and entertainment needs. read more
A Glimpse into the Origins of Outdoor Water Fountains
Countless of ancient Greek writings were translated into Latin under the auspices of the scholarly Pope Nicholas V who led the Roman Catholic Church from 1397 to 1455.... read more
The Wide Range of Outdoor Wall Fountains
You can choose to place your wall-mounted fountain on an existing wall or build it into a new wall. This type of fountain contributes to a cohesive look making it appear as if it... read more