Factors to Think About When Determining Where to Put Your Fountain

It is important to think about how a water fountain will fit into your garden before purchasing one. The entryway to a hotel or building is an ideal spot for them, as they offer a lovely welcome to visitors. 53265ct__24815.jpg

If you prefer to put yours against a wall, there are fountains designed specifically for this purpose. To install one against a wall, look for a bar or hook on the back made precisely for this purpose. Such fountains are unstable on their own, therefore, be sure to affix it right away so that it does not topple over as a result of weather conditions, animals or other natural occurrences.

In public places like parks where people tend to sit and relax for a few minutes, you will notice one other option – the garden sculpture style.

A Peek into the Roots of Outdoor Fountains

Hundreds of ancient Greek documents were translated into Latin under the patronage of the scholarly Pope Nicholas V who led the Roman Catholic Church from 1397 to 1455. He also undertook the beautification of the city to make it into the worthy capital of the Christian world. Beginning in 1453, he called for the reconstruction of the Acqua Vergine, a decaying Roman aqueduct which had transported fresh drinking water into the city from eight miles away. Nicholas V also revived the Roman custom of installing imposing fountains, known as mostras, to mark the end point of the aqueduct.

At his behest, the architect Leon Battista Alberti undertook the building of a wall fountain in the spot where the magnificent Trevi Fountain now stands. The changes, as well as the extensions included in the restored aqueduct, ultimately made it possible to provide the Trevi Fountain and the well-known baroque fountains in the Piazza del Popolo and Piazza Navona with the necessary water to function.

Guidelines for Installing a Wall Fountain

Wall elements can complement any room. The benefits of the water sounds include providing serenity and calm to the room. While any area will benefit from a wall fountain, they are most often placed in foyers. How to install one varies somewhat depending on the model, but there are some general guidelines that apply to all of them. Assembly will include putting together various parts. First you should attach the foundation to the upper section, then connect the pump and the tubing. It is advisable to carefully look at the instructions before you begin the assembly process. The set-up technique is quite easy to grasp. That said, there can be small differences depending on which style you have. Have a colleague hold the wall fountain in the desired location, then mark the wall appropriately. The simplest way to make sure it is mounted correctly is to use a level. Mark the position where you want the upper end of the wall fountain as well as the lower part. Your wall fountain can be hung using one of two methods. You will notice slots on the back side of the wall fountain which can be hung directly onto the screws. Alternatively, you can affix brackets to the wall and use those. The bracket option is better, specifically for wall fountains that are big and heavy. Decide where the brackets need to be located and mark the wall as required. Drill pilot holes in the wall where you need to position the drywall anchors. Carefully tap on the anchors with a hammer to insert them into the wall.

Use a cordless drill or a screwdriver to mount the brackets, making sure they are straight. Now, hoist your unit and fit it on the mounting brackets. Ensure that it is firmly installed and level. If the alignment is correct, it’s time to add some water. The pump should be fully submerged under water. It is now time to plug it in and watch the water flow. The water basin should be filled to about one inch below the top end. The basin will overflow when the pump is shut off if it is too full, so be careful not to fill it completely. Once the pump is turned off the water all settles at the bottom of the bowl, causing the water level to rise. Damage can be be the result if the water is overly full and overflows down your wall.

From Where Did Large Outdoor Fountains Originate from?

A fountain, an amazing piece of engineering, not only supplies drinking water as it pours into a basin, it can also launch water high into the air for a noteworthy effect.

From the onset, outdoor fountains were simply meant to serve as functional elements. Residents of urban areas, townships and small towns used them as a source of drinking water and a place to wash, which meant that fountains had to be linked to nearby aqueduct or spring. Used until the nineteenth century, in order for fountains to flow or shoot up into the air, their origin of water such as reservoirs or aqueducts, had to be higher than the water fountain in order to benefit from the power of gravity. Acting as an element of decoration and celebration, fountains also provided clean, fresh drinking water. Roman fountains usually depicted imagery of animals or heroes made of bronze or stone masks. Muslims and Moorish garden designers of the Middle Ages included fountains to re-create smaller versions of the gardens of paradise. King Louis XIV of France wanted to demonstrate his superiority over nature by including fountains in the Gardens of Versailles.

The Popes of the 17th and 18th centuries were glorified with baroque style fountains constructed to mark the arrival points of Roman aqueducts.

Urban fountains built at the end of the 19th century functioned only as decorative and celebratory ornaments since indoor plumbing provided the essential drinking water. Fountains using mechanical pumps instead of gravity helped fountains to deliver recycled water into living spaces as well as create unique water effects.

Embellishing city parks, honoring people or events and entertaining, are some of the purposes of modern-day fountains.

Decorative Garden Fountains And Their Use In Ancient Minoa

On the Greek island of Crete, excavations have unearthed conduits of multiple sorts. These were used to provide cities with water as well as to lessen flooding and eliminate waste. The primary materials employed were rock or clay. There were terracotta conduits, both round and rectangular as well as canals made from the same material. There are a couple of examples of Minoan clay piping, those with a shortened cone shape and a U-shape which have not been seen in any culture since that time. Terracotta conduits were employed to circulate water at Knossos Palace, running up to three meters under the floor surfaces. These Minoan pipes were additionally made use of for gathering and stocking water, not just distribution. Hence, these pipes had to be able to: Underground Water Transportation: Originally this process seems to have been created not for ease but rather to provide water to specific individuals or rites without it being observed. Quality Water Transportation: There is also data which indicates the pipelines being employed to supply water features independently from the local process.


The Best Way to Hang a Wall Water Fountain
The water level will rise because all of the flowing water will settle down at the bottom of the basin. The water will overflow and cause damage if the wall fountain is too full. read more