A Few Simple Techniques to Install a Wall Water Element

Just about any space will benefit from the addition of a wall fountain. ft_139__27581.jpg A waterfall will bring a sensation of peacefulness with the comforting sounds of trickling water. People tend to set up their wall fountains in entryways, but, in fact, they can be a wonderful addition to any room where everyone gathers. How to mount one varies a bit depending on the model, but there are some general directions that apply to all of them. Assembly will include putting together various parts. First you should attach the base to the upper section, then connect the pump and the tubing. It is advisable to carefully review the directions before you begin the assembly process. You should find the procedure relatively easy. Be aware, though, that the design you have might call for a somewhat different procedure. Do not hesitate to get someone to assist you to position the wall fountain in the right spot while you make a small mark on the wall. To ensure a proper line, use a level. Put your marks at both the top and the bottom. Your wall fountain can be mounted in one of two ways. You can put the screws in the wall and glide them into the slots on the back of the wall fountain. A second option is use brackets mounted on the wall. The second option is better suited, particularly for heavier wall fountains. Mark the point on the wall where the brackets need to be installed. Drill pilot holes in the wall where you need to place the drywall anchors. Carefully hammer the anchors into your wall. Use a cordless drill or a screwdriver to attach the brackets, making certain they are level. It is then time to put your wall fountain onto the mounting brackets.

Ensure that it is firmly installed and straight. Add water once the wall fountain is ready. The pump should be completely immersed under water. At this point plug it in and the water will start to flow. Very carefully pour in just enough water to reach one inch below the top edge of the basin. The basin will overflow when the pump is switched off if it is too full, so be sure not to fill it completely. Anytime the water is not being pumped, it all settles at the bottom causing the water level to rise. The water will overflow and cause damage if your wall fountain is too full.

The Countless Options in Wall Fountains

Having a wall fountain in your backyard or on a veranda is excellent when you seek to relax. Even a small space can include a custom-made one. Whether it is stand alone or mounted, you will require a spout, a water bowl, internal piping, and a pump. There are many different varieties available on the market including traditional, fashionable, classical, or Asian.

Also knownas a floor fountain, a stand-alone wall fountain is normally rather big, and its basin is placed on the ground.

A stand-alone fountain can either be incorporated onto a wall already in existence or fitted into a wall under construction. The appearance of your landscape will seem more unified instead of disjointed when you install this style of fountain.

What Are Landscape Fountains Manufactured From?

Though they come in alternative materials, modern garden fountains tend to be made of metal.

Metals tend to create clean lines and unique sculptural accents and can fit almost any design preference or budget. If you have a modern look and feel to your interior design, your yard and garden should mirror that same style.

At present, copper is very common for sculptural garden fountains. Copper fountains are the ideal option because they are perfect for the inside and outside. Copper is also adaptable enough that you can pick a range of styles for your fountain, from contemporary to whimsical.

Brass water fountains are also common, although they tend to have a more conventional look than copper ones. Even though they are a bit old-fashioned, brass fountains are quite popular because they often incorporate interesting artwork.

Arguably the most contemporary of all metals is stainless steel. If you pick a cutting-edge steel design, both the value and tranquility of your garden will get a nice lift. As with most fountains, they are available in many sizes.

Because it is both lighter and cheaper than metal but has a similar look, fiberglass is quite common for fountains. Keeping a fiberglass water fountain clean and working well is quite effortless, another aspect consumers love.

The Many Reasons to Include a Wall Fountain

A great way to enhance the appearance of your outdoor living area is to add a wall fountain or an exterior garden fountain to your landscaping or garden design. Historical fountains and water features have sparked the notice of modern-day designers as well as fountain manufacturers. As such, integrating one of these to your home design is a great way to connect it to the past. In addition to the positive attributes of garden fountains, they also produce water and moisture which goes into the air, thereby, drawing in birds as well as other creatures and harmonizing the environment. Birds enticed by a fountain or bird bath often frighten off irritating flying invaders, for instance.

Wall fountains are a good choice if your yard is small because they do not require much space as compared to a spouting or cascading fountain. Either a stand-alone fountain with an even back and an attached basin placed against a fence or a wall, or a wall-mounted kind which is self-contained and hangs on a wall, are some of the options from which you can choose. A fountain can be added to an existing wall if you include some type of fountain mask as well as a basin to collect the water at the bottom. The plumbing and masonry work necessary for this type of job requires know-how, so it is best to employ a skilled person rather than do it yourself.

Outdoor Garden Fountains And Their Use In The Minoan Civilization

During archaeological excavations on the island of Crete, a variety of varieties of conduits have been found. These furnished water and eliminated it, including water from waste and storms. They were typically constructed from terracotta or stone. There were terracotta pipes, both round and rectangular as well as canals made from the same components. Among these were terracotta pipes that were U-shaped or a shortened, cone-like shape which have only appeared in Minoan society. Terracotta pipes were put down beneath the floor surfaces at Knossos Palace and used to move water. Along with circulating water, the terracotta pipes of the Minoans were also used to amass water and accumulate it. To make this conceivable, the piping had to be tailored to handle: Underground Water Transportation: the concealed setup for water movement may have been chosen to supply water to specific individuals or events. Quality Water Transportation: The conduits could also have been made use of to carry water to fountains that were different from the city’s standard process.


Water Fountains: The Minoan Culture
Archaeological digs in Minoan Crete in Greece have revealed varied kinds of conduits. In conjunction with providing water, they dispersed water that amassed from storms or waste... read more
Your Large Outdoor Fountain: Maintenance & Routine Service
Replace the water regularly so it is always clean. Remember to remove debris like leaves, twigs or dirt as quickly as possible. Ensure that your outdoor wall fountain is ... read more
The Multiple Styles of Wall Water Fountains
It is possible to integrate a wall-mounted water feature onto an already existing wall or built into a new wall. Integrating this type of water feature into your... read more